Large Size Paper Bowl Machine
Most disagreements about a large size paper bowl machine come down to what was never written down. This guide sets out the paper cup and bowl producers requirements that decide whether a machine works: what it must deliver at 66–86 units per hour, what it is built from, and what to verify before handover.
What This Equipment Does
Position a large size paper bowl machine by what it removes from the paper cup and bowl producers process. This configuration handles 330 ml product at 66–86 units per hour, which is the number the rest of the line is designed around.
Key Technical Specifications
This large size paper bowl machine draws 6.5–8.5 kW and occupies 3200 × 1900 × 3200 mm, uses 304/316L stainless steel contact parts and holds a 1.5 ml tolerance on 330 ml product.
Integration With Your Line
The costliest mistake is treating a large size paper bowl machine as a standalone machine. Once it accepts a line encoder signal and works across a 3200 mm working width, it becomes part of the paper cup and bowl producers control loop and recipe changes stop being manual.
Capacity Planning and ROI
Model the large size paper bowl machine on a difficult month rather than an average one. A line running 330 ml product with a 10-minute changeover either holds up or it does not, and the investment should be judged on the harder case.
Maintenance and Service
Treat the large size paper bowl machine service records as production data. Once a few months of interventions are logged, the failure pattern on the seals and the drive usually tells you where the real risk sits.
Technical Specifications
| Production speed | Print area | Applicable material | Colour capability | Registration accuracy | Total power | Machine footprint |
|---|---|---|---|---|---|---|
| 66–86 pieces/min | 180 × 120 mm | 330 ml | 8 colours | ±1.5 mm | 6.5–8.5 kW | 3200 × 1900 × 3200 mm |
Troubleshooting: Common Faults and How to Resolve Them
| Symptom | Likely cause | Corrective action |
|---|---|---|
| Output drops below 66 units per hour | Upstream supply interrupted | Check the buffer level and the upstream transfer into the large size paper bowl machine |
| Cycle stops mid-batch | Photo-eye blocked by a label tail | Adjust the photo-eye sensitivity and clear the label backing strip |
| Uneven product appearance | Process window drift | Log the last 10 minutes of machine data and adjust within the specified window |
How to Select the Right Configuration
| Your situation | Recommended configuration | Notes |
|---|---|---|
| Continuous operation, three shifts | Heavy-duty drive and frame package | Built for continuous duty rather than campaign use |
| Operations upgrading from manual steps | Semi-automatic configuration with 10-inch colour touch recipe storage | Lower entry cost with an upgrade path |
| High-mix seasonal producers | Programmable recipe bank with 10-minute changeover | Handles a changing order book without a specialist |
| Plants requiring remote monitoring | Control platform with network interface | Machine data available to the paper cup and bowl producers site team |
Delivery and Acceptance Checklist
- Confirm the large size paper bowl machine documentation set includes the exploded view and the seal change procedure
- Confirm the large size paper bowl machine holds 1.5 ml tolerance across the full 66–86 range
- Confirm the encoder interface on the large size paper bowl machine indexes correctly with the line PLC
Frequently Asked Questions
What is the actual connected load of the large size paper bowl machine?
The reference build draws 6.5–8.5 kW. Confirm starting current and supply arrangement at the site.
Is the large size paper bowl machine suitable for continuous three-shift running?
The reference build is rated for continuous duty in the 66–86 band. For heavier duty ask for the upgraded drive package.
What is the delivery lead time for the large size paper bowl machine?
Lead time depends on the control package and the format tooling. Ask for the date with the order, not separately, so the 330 ml set is included.
How do I size this for my plant?
Base capacity on peak hourly demand plus 15–20% headroom, and confirm utility availability before ordering.
Does it integrate with existing lines?
Yes, with standard PLC interfaces and shared CIP or control logic when specified at quotation.
What is typical lead time and service?
Standard machines ship in weeks; remote commissioning and spare parts support are usually included.
Explore more: Cup Making Machines · Latest Articles. Ready to discuss your project? Request a quote.