Double PE Coated Cup Machine
Choosing the right double PE coated cup machine is a practical decision for paper cup and bowl producers. This guide covers the criteria that matter when specifying, integrating and accepting a double PE coated cup machine on a production line, with the figures a buyer should confirm in writing before placing an order.
What This Equipment Does
The test of a double PE coated cup machine is not the demonstration but the third month. At 9086–12586 units per hour for 8 oz product, this configuration is designed to hold its rate once the novelty of commissioning has worn off.
Key Technical Specifications
The specification that limits output on a double PE coated cup machine is usually changeover. At 15 minutes per 8 oz format and 9086–12586 units per hour, campaigns have to be planned around the stop.
Integration With Your Line
Downstream of a double PE coated cup machine the cups still have to be counted, stacked and packed, and the paper cup and bowl producers production line real capacity is limited by whichever of those steps is slowest.
Capacity Planning and ROI
Include mould sets and spares in the numbers. A double PE coated cup machine with a 10-inch colour touch and a 15-minute changeover has a running cost that can be predicted, and predictability is worth more to a paper cup and bowl producers buyer than a lower price.
Maintenance and Service
Train the people who run the shift, not only the commissioning engineer. On this double PE coated cup machine the wear items are simple to identify — seals, drive, guide rails — and most paper cup and bowl producers downtime is caused by a part that was available but not swapped.
Technical Specifications
| Rated capacity | Cup format range | Wall structure | Cup material | Control system | Total power | Machine footprint |
|---|---|---|---|---|---|---|
| 9086–12586 cups/min | 8 oz | Single / double / triple wall | PE / PP / paper laminate | Siemens PLC with 10-inch colour touch | 5.5–7.5 kW | 1800 × 1900 × 2100 mm |
Troubleshooting: Common Faults and How to Resolve Them
| Symptom | Likely cause | Corrective action |
|---|---|---|
| Format changeover exceeds 15 minutes | Tooling set not standardised | Standardise the tooling and keep a complete spare kit on site |
| Cycle time inconsistent | Product variation affecting the process | Re-verify the 2.0 ml tolerance and record the product density |
| Dosing accuracy degrades after two hours | Thermal drift in the dosing system | Re-verify the 2.0 ml tolerance and check the cooling on the dosing head |
| Position drift over a long run | Guide wear beyond tolerance | Replace the guide rails and re-verify the 1800 × 1900 mm clearance |
How to Select the Right Configuration
| Your situation | Recommended configuration | Notes |
|---|---|---|
| Plants requiring remote monitoring | Control platform with network interface | Machine data available to the paper cup and bowl producers site team |
| Lines with frequent format changes | Quick-change tooling with a 15-minute changeover | Reduces lost time during campaign switches |
| Plants needing traceability | Per-batch parameter logging | Audit-ready records for paper cup and bowl producers operations |
| Export-oriented producers | CE documentation package | Simplifies market access |
Delivery and Acceptance Checklist
- Record the double PE coated cup machine as-found condition before any commissioning adjustment
- Check that guarding and safety devices on the double PE coated cup machine match the safety file
- Confirm the 10-inch colour touch recipe set matches the 8 oz format to be produced
Frequently Asked Questions
How are settings recorded for traceability?
The 10-inch colour touch stores a recipe per format and the parameters can be exported, which matters for paper cup and bowl producers operations running audits.
Can the double PE coated cup machine handle a 8 oz product change without full cleaning?
Changeover between compatible formats is a 15-minute operation. A material change needs the cleaning cycle, and the sequence is documented on the 10-inch colour touch.
What is the delivery lead time for the double PE coated cup machine?
Lead time depends on the control package and the format tooling. Ask for the date with the order, not separately, so the 8 oz set is included.
How do I size this for my plant?
Base capacity on peak hourly demand plus 15–20% headroom, and confirm utility availability before ordering.
Does it integrate with existing lines?
Yes, with standard PLC interfaces and shared CIP or control logic when specified at quotation.
What is typical lead time and service?
Standard machines ship in weeks; remote commissioning and spare parts support are usually included.
Explore more: Cup Making Machines · Latest Articles. Ready to discuss your project? Request a quote.